44 In stock
HIFI Tube Preamplifier
Tube Preamplifier Pure with Shigeru Wada Circuit Tube 12AX7 12AU7 6Z4 Rectifier Whole Aluminum Chassis HIFI Audio 110V/220V
Model No: WHFTPA-SHWA12
Tube preamplifier is used as tone processing amplifier between sound sources and power amplifier, so it is so-called, the preamplifier output quality sound, power amplifier stage output power, which indicate that a quality preamplifier plays a key role in the entire audio amplifier system. Therefore, it is very important that the sound system choice preamplifier. Tube preamplifier has its special tube soft and warm sound, its listening sense has been ranked the first reputation and praise in all preamplifier, it can be applied to tube power amplifier, transistors one, and active sound system, especially for transistor amplifier, it can make the exists boring, blunt digital taste of your original system becomes rounded, sweet, tube taste is very rich; When listening to human voice, especially for the song folk song female voice, the sound is very warm, very sweet.
Diagram of Tube Installation
I bought CD player that is earlier 16bit models a decade ago, for adding musical charm to the sharp and dry digital sound to improve listening sense, but also because the tube is easier to produce pre-production and high rate of return for many years also try to produce a variety of line sound effects of a variety of tube pre-level, such as Shigeru Wada and Marantz.
The two circuits of preamplifier are more familiar and well-known. Through several repeated proofing tests and contrasts, found Shigeru Wada look is extremely good from performance and sound quality. It is to keep Marantz7 mellow and rich flavor of the characteristics of music, while dynamic, transient, high and low frequency response, analysis of signal-to-noise ratio better than Marantz 7, and Keep pace with each other in the sound field, penetrating sense with Marantz7 . In fact, this is only analysis from Shigeru Wada’s circuit, it is not difficult to find that its preamplifier is made of a very good stability by high-gain double three-tube, composed of two stages voltage amplification, only one tube has 10 times signal amplification capability with a very high sensitivity.
And its power stage is also known by most of audiophiles, a very superior performance double tube 12AU7 composed of the radio level follower which using SRPP cathode output follower circuit that is similar with SRPP, it is different with the ordinary voltage amplifier stage, it does not have the voltage gain, the role is only current amplification and to reduce the output impedance, so that the load capacity is much larger than the co-screen pole follower, whether in high frequency response or signal to noise ratio. Compared with Marantz 7, it greatly improve low-frequency response, signal-to-noise ratio is also improved in varying degrees, in terms of sound performance is more balanced and comprehensive. So the design of Shigeru Wada preamplifier is very reasonable, both a very high sensitivity, but also a very good carrying capacity, no matter what kind of power stage is more flexible, play most vividly.
Who is familiar with Shigeru Wada are known, characterized by prominent human voice, better midrange. It is appropriate to even harmonic distortion when tube working, which will not worsen listening sense, on the contrary increase the sound of beauty, make the sound be more smooth, some details will be more prominent like to do a certain optimization, especially when playing human voice, there will be some feelings of rich taste out, tube taste is very strong. It will not only play in human voice will give charm, but also playing some pieces of music, such as some indoor recording of the violin, saxophone, jazz and other music, will also have a unique style.
1. Circuit used Shigeru Wada improved field circuit of the original version; excellent PCB circuit design, reasonable, regular, symmetrical device layout, and strictly follow the rule of single point grounding line.
2. Whole aluminum chassis especially made for Shigeru Wada with very fine black brushed oxidation, looks shiny, extraordinary taste.
3. And it used whole aluminum solid sand drying high-end knobs. the plate thickness of body is all 2.8mm, panel thickness is 8mm with high precision milling machine finishing, and tube seats positioning accuracy, holes-cut is smooth and sleek.
4. Power transformer is up to 120W (EI8642 / H50 film) with a horizontal cover, and the primary and second windings of transformer are shielded strictly. Left and right channel of filament voltage has been supplied by independent winding respectively; completely eliminate mutual crosstalk, good power transformer output good sound.
1. Input sensitivity : 200mv
2. Output voltage: 2V (RMS THD <0.03%)
3. Signal to noise ratio :> 95dB
4. Frequency response : 10Hz-50KHz (-0.5dB)
5. Input impedance: 250K ohms
6. Output impedance: 150Kohm
7. Input voltage: AC 110V or 220V/50~60Hz
8. Whole power consumption: < 50W
9. Dimension(W*D*H) 360mm * 190mm * 140mm
10. Net Weight: 4.5Kg
11. Tubes: 12AX7 * 2; 12AU7 * 2 ; 6Z4 * 2.
Power cord x 1
Appications by Audiophiles
1.Important: Import duties, taxes and other customs related charges all are not included into shipping cost . Buyers bear all responsibility for all extra charges incurred (if any).
2. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
3. When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
4.Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound. The shipping rate can be showed at the Checkout page. There are two options for shippig as below.
A. Standard Shipping(≤2KG): The Post Registered Air Mail, USPS/ePacket, PostNL, Singapore Post, or DHL Global Mail
B. Express Shipping: EMS, DHL, UPS , or Fedex, Special Route.,etc. For faster shipping and smooth transaction, we will change the shipping company among themC. Economy Shipping: China Air Post Mail / Parcel, Hongkong Air Post Mail / Parcel, or shipment by sea etc
You may return most new, unopened items within 7 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
1. One year Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.2. Defective items MUST BE reported and returned within the warranty period (with the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY. You agree to all of the above-listed policies upon ordering on our store.