IWISTAO Single-ended Tube Amplifier 2X3.5W Class A 6N1 Drive 6P14 Wood Casing Scaffolding Soldering

100 In stock

Single-ended tube amplifier

 Single-ended Tube Amplifier 2X3.5W  Class A 6N1 Drive 6P14 Upgrade Version Retro-style Willow-wood Casing Scaffolding Soldering HIFI DIY Model No: WVTA-6P14(S)   Tube 6p14 is commonly used in tube radio power as output power tube before transistors was used, its sounds gorgeous, mellow! Savor, nostalgic thoughts spontaneously! Particularly suitable to enjoy...
$199.00 $189.00
Save $10.00
Click to refer to Shipping Rate
+
-
$189.00
Wishlist

To add this product to your wish list you must Sign In or Create an account

 Single-ended Tube Amplifier 2X3.5W  Class A 6N1 Drive 6P14 Upgrade Version Retro-style Willow-wood Casing Scaffolding Soldering HIFI DIY


Model No: WVTA-6P14(S)

 

Tube 6p14 is commonly used in tube radio power as output power tube before transistors was used, its sounds gorgeous, mellow! Savor, nostalgic thoughts spontaneously! Particularly suitable to enjoy the vocal-oriented for you!

 

Between tubes and speaker, the coupling output transformer are used at this tube amplifier, showing the layout of a triangle that transformer arrangement can minimize mutual interference, to ensure that the unit has a high signal to noise ratio. It is very suitable for using as a desktop computer and upgraded stereo sound. Since the tubes of the unit all work in class A amplified state, its distortion is lower, and sound sweet, soft!

 

This unit is suitable for matching with small high-sensitivity bookshelf of course matching with speakers, full-range speaker is perfect. Because tube has overload strong advantages, its actual power output without distortion is quite with the output of 2x20w transistor amplifier.

 

Tube lighting 

 

Bottom View

 

Inside View (To prevail in kind)

 Only for you information, the photo below don't include the oil coupling capacitors and choke coil.

 

 

Features

  1. Fully scaffolding hand soldering by manual.
  2. Willow wooden chassis by handmade DIY that dried will not crack, after then repeated polishing painting, rich textures, simple and beautiful! Unique in the world!
  3. 3MM thick aluminum top plate and the bottom plate is 1MM thick aluminum one, the benefits of using a metal top plate and bottom one can be isolated portion of clutter!
  4. Adapt an enough 75W power transformer power, it is not able to be hum and over hot. With horizontal installed and no cover, it all seems a work of art. Winding method of Output transformer use 3 folder 2 winding, the core is made of new Kawasaki 0.35MM thick Z11 silicon steel sheet whose permeability is higher, low frequency of this unit will be lower.
  5. Coupling capacitors and decoupling capacitors using German WIMA MKP dedicated hi-fi capacitors; sound is very mellow, high-frequency thin! Japanese audio-specific 330uf35v ruby electrolytic capacitor cathode served tube 6p14.
  6. The power rectifier adapts transistor rectifying plus tube buffer circuit that can protect the tubes. Filtering capacitors use Phil ips 150uf * 1, Japanese chemical 47uf * 1; 22ufx2 High Voltage.
  7. Uprade version: 
    • With gold-plted tube base sockets all.
    • With the power and cement resistors 5H choke coil, they compose a clrc network that have a strong immunity capability to hum.
  8. Volume control adapt quality Japan ALPS double 100k potentiometer, damping is moderate, no rotation noise.
  9. There is room inside the chassis, you can replace a larger volume of oil capacitors or easy to DIY the circuit as you like.

Specifications

  1. Version: Upgrade verion
  2. output power: 3.5W + 3.5W (8 ohms)
  3. Frequency Response: 30Hz - 40 KHz (+ -1db)
  4. Total Distortion: < 1% (@1 kHz)
  5. Input Sensitivity: 800mV
  6. S/N ratio: > 90 dB
  7. Operating voltage: AC-230V / 200MA + 3.15V-0-3.15V / 3A
  8. Power consumption: 70W
  9. Input impedance: 10K ohms
  10. Output impedance Chu: 4 or 8 ohms (Z11-EI57 * 30)
  11. Tubes:

a) 6N1x1

b) 6Z4 x1

c) 6P14x2

      10. Weight: 5kg

      11. Dimensions (L x D x H): 250mm X 300mm X130mm (including tubes)

 

Note:

1. Please leave the seller message, which ouput impedance you need, 4 ohms or 8 ohms. Default shipment is 8 ohms.

2. This amp can match with those full-range speakers that is 3-5 inches, and sensitivity is 90dB or above perfectly! If your speakers is low sensitivity, it was suggested to buy other several high-power tube amplifiers proper.

 

Circuit ( To prevail in kind, cicuit diagram only for you information)

 

 

Shipping

1.Important: Import duties, taxes and other customs related charges all are not included into shipping cost . Buyers bear all responsibility for all extra charges incurred (if any).

2. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

3. When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

4.Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound. The shipping rate can be showed at the Checkout page. There are two options for shippig as below.

A. Standard Shipping(≤2KG): The Post Registered Air Mail, ePacket or DHL Global Mail

B. Express Shipping: EMS, DHL, UPS , or Fedex. For faster shipping and smooth transaction, we will change the shipping company among them

Returns Policy

You may return most new, unopened items within 7 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Seller Guarantees

1. One year Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.

2. Defective items MUST BE reported and returned within the warranty period (with the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY. You agree to all of the above-listed policies upon ordering on our store.

Recently Viewed Products