IWISTAO High-gain Vinyl Balanced Output Phono Preamplifier MM Moving Magnet MC Moving Coil Volume Control Class A Circuit

29 In stock

MM/MC Phono Preamplifier

To add this product to your wish list you must Sign In or Create an account

IWISTAO High-gain Vinyl Balanced Output Phono Preamplifier MM Moving Magnet MC Moving Coil Volume Control Class A Circuit     Model No: WMMC-PA30   This unit is designed with high gain, its gain is twice that of conventional phono preamp, which adopts split casing structure, has independent power supply chassis,...
$399.90
Click to refer to Shipping Rate
+
-
$399.90
Important: Import duties, taxes and other customs related charges all are not included into shipping cost . Buyers bear all responsibility for all extra charges incurred (if any).

IWISTAO High-gain Vinyl Balanced Output Phono Preamplifier MM Moving Magnet MC Moving Coil Volume Control Class A Circuit

 
 

Model No: WMMC-PA30

 
This unit is designed with high gain, its gain is twice that of conventional phono preamp, which adopts split casing structure, has independent power supply chassis, includes electronic filter and voltage regulator circuit. Its output circuit of main phono preamp part includes balanced (XLR, True balance) output, with single-ended output, can be connected to single-ended and balanced input power amplifier equipment, in addition, it also includes a volume controller to easily adjust the loudness.
 
 
 
 

Features

1. Choose fully discrete components to construct the circuit, which is convenient for fine adjustment of various data parameters.
2. There are two built-in phono amplifier circuits, MM and MC, which can adapt to most users' vinyl record players on the market.
3. The main amplifier circuit selects field effect transistors, which is convenient to reduce the sensitivity of the components to temperature changes and improve the distortion.
4. Choose pure class A circuit to form the amplifier circuit, effectively reduce the harmonic distortion and improve the sound effect
5. The phono equalization circuit does not use the feedback circuit of the conventional integrated IC circuit, but chooses the attenuation type, whichever is the characteristic of its natural sound.
 
 
It is produced in small batches, so the logo fonts are filled in by hand. If you are not used to or do not like this type of marking, please do not buy it.
 
 

Specifications

1. Voltage gain (1KHz): MM: 46dB, MC: 66dB,
2. Maximum output: single-ended 3V, balanced 6V,
3. Distortion (at 1KHz, 1V output): MM: 0.8%, MC: 1.2%,
4. Signal-to-noise ratio (1KHz, unweighted): MM: 85dB, MC: 75dB
5. Input impedance: MM: 30KΩ, MC: 620Ω
6. Voltage: AC 220V/50~60HZ
7. Gross weight: 3.5kg
8. Single size: width 13 depth 27 height 6 cm, two stacking height is 12 cm.
 

Wire Connection Diagram

 

 

 

 

Learn more about stage amplifier

 

Phono stage amplifier is designed for a phono signal amplification while using Turntables amplifier inside for special sound equalization circuit (RIAA) for restoring vinyl, it cannot be used for other purposes.

 

Method for checking noise sources

After phono player connected with the phono amplifier stage, if there is a significant low-frequency noise, you need to check in which part of the noise. First unplug the phono amplifier input signal cable to disconnect connection between them, if the low-frequency noise disappeared or significantly reduced, that may explain the noise from the phono player; obvious if the same or reduce low frequency noise , the noise it is very likely to put itself caused by phono amplifier.

It may cause a greater frequency noise that no specialized non-standard phono ground wire.

Generally, nonstandard phonograph is a turntable part of music center to cope with this set of sound designed, when external phono amplifier put to ground that could cause a large hum due to the different ground ways.
 

 

 

Shipping

1.Important: Import duties, taxes and other customs related charges all are not included into shipping cost . Buyers bear all responsibility for all extra charges incurred (if any).

2. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

3. When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

4.Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound. The shipping rate can be showed at the Checkout page. There are two options for shippig as below.

A. Standard Shipping(≤2KG): The Post Registered Air Mail, USPS/ePacket, PostNL, Singapore Post, or DHL Global Mail

B. Express Shipping: EMS, DHL, UPS , or Fedex, Special Route.,etc. For faster shipping and smooth transaction, we will change the shipping company among them

C. Economy Shipping: China Air Post Mail / Parcel, Hongkong Air Post Mail / Parcel, or shipment by sea etc

Returns Policy

You may return most new, unopened items within 7 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Seller Guarantees

1. One year Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.

2. Defective items MUST BE reported and returned within the warranty period (with the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY. You agree to all of the above-listed policies upon ordering on our store.

Recently Viewed Products