Out of stock
HIFI FET Power Amplifier
IWISTAO HIFI Amplifier Class A FET Tube Single-ended 2 x 16W Whole Aluminum Casing Desktop (Model No: WHFFA-PA01)
It is a small desktop power amplifier, supper bass, and its high-frequency is too flavor, definitely not irritable, smooth like as silk in general; it is infective to listening to the sound of strings and human voice, and this is definitely a warm sound amplifier, whose voice is warm and delicate, while control power of low frequency and damping are also very perfect. Then there is remarkable controlled for noise of the unit, has come to the point of terror, you put your ear to touch the speaker may have a little noise when late at night.
1. Basic faithful to the classic PassAm circuit, merely reduces the output power to compare with expensive model PassA5, and its structure is completely same, showing the maturity of its circuit.
2. Per channel with four 10000uf to compose a CRC filter capacitor, total filtering capacity is 80000uf. The most important is, left and right channels have independent filtering circuit. Not only does it reduce the ripple further, but also it improves the overall separation fundamentally.
3. Added upc1237 speaker protection system, switch absolutely no impact sound while performing the midpoint of the DC protection, to prevent damaging the amplifier circuit and burning your expensive speakers.
4. Integrated volume control potentiometer link.
5. Added a trimming circuit in the mid-point differential input that can correct the problem for the offset of midpoint at a certain scope.
6. The unit used was 1kg heat sink approximately, and it is made of whole aluminum, its benefits are, the unit is also involved in heat radiation except heat sink, so that total heat dissipation area is increased substantially.
7. As a pure design, the chance to have a cooling capacity of more than 50 degrees outside, you should be prepared mind, this circuit is not nice if it is not hot.
Don't touch the amplifier when it works, there is high temperature on itbecause the amplifier works on Class A state.
1. Output power: 16W * 2.
2. Frequency response: 20Hz – 20k Hz
3. Distortion: < 0.01% (1KHz)
4. Input Sensitivity: < 2Vrms
5. Signal to Noise Ratio: > 102dB
6. Voltage gain: 11 times
7. Output impedance: 4 - 16 ohm
8. Working Voltage: AC220V/50Hz
9. Maximum power consumption: <110W
10. Dimension(W * D * H): 280mm * 212mm * 70mm
11. NW: 4.8Kg
12. Color: Black
Power cord x 1
1 pc x HIFI Amplifier 2 x 16W Class A FET Single-ended
1pc x Power Cord
1.Important: Import duties, taxes and other customs related charges all are not included into shipping cost . Buyers bear all responsibility for all extra charges incurred (if any).
2. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
3. When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
4.Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound. The shipping rate can be showed at the Checkout page. There are two options for shippig as below.
A. Standard Shipping(≤2KG): The Post Registered Air Mail, USPS/ePacket, PostNL, Singapore Post, or DHL Global Mail
B. Express Shipping: EMS, DHL, UPS , or Fedex, Special Route.,etc. For faster shipping and smooth transaction, we will change the shipping company among themC. Economy Shipping: China Air Post Mail / Parcel, Hongkong Air Post Mail / Parcel, or shipment by sea etc
You may return most new, unopened items within 7 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
1. One year Manufacturer`s limited Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.2. Defective items MUST BE reported and returned within the warranty period (with the original packaging, if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY. You agree to all of the above-listed policies upon ordering on our store.